NATURAL GAS PIPES

APPLICATION AREAS

Residential and Industrial Natural Gas Installations
LPG Installations
Transmission of All Kinds of Combustible and Explosive Gases
Transmission of Petroleum and Petroleum Derivatives.

PRODUCTION STANDARDS

EN 10217-1 (TS EN 10217-1): P 195 TR1/TR2, P 235 T1/TR2, P 265 TR1/TR2
EN 10217-2 (TS EN 10217-2) : P 195 GH / P235 GH / P 265 GH / 16 Mo 3
EN 10255 : S 195 T
SI 103 : S 332, S 414
BS 4360 : 40 A, 43 A
SI 530 : 530 A, 530 B, 530/42
EN 10224 : L235,L275,L355

Production Range:
● Outer diameter: Between 21.3 mm - 323.9 mm
● Wall thickness: Between 2 mm and 10 (13) mm.
● Height:

1/2’’ - 3’’ = 5 - 8 m (1/2"- 1 1/2" = 4 - 8.5 m)
6’’ - 10’’ = 5 - 13 m (2 " - 6" = 5 - 14 m) (6" - 12" = 5 - 14.6 m)

Production Standards:
API 5L PSL 1
API 5L PSL 2
API 5L PSL 2(Sour Service)
API 5L PSL 2(Offshore Service)
TS 6047-1 EN 10208-1 (EN 10208-1)
TS 6047-2 EN 10208-2 (EN 10208-2)

ERW POLYETHYLENE COATED NATURAL GAS PIPE

Production Range:
Outer diameter: Between 21.3 mm and 323.9 mm
● Produced according to API 5L standard for natural gas pipes
● Natural gas installation pipes are manufactured with welding ends.
● Pipes are coated with varnish;
● Ultrasonic and Eddy Current non-destructive tests are used. It is tested twice.
● All pipes are checked for leaking by means of 100% hydrostatic pressure test and magnetic test
● and controlled whether there is any error in the metallographic structure of the pipe.

Coating Features:
Production Standards:
DIN 30670 AND UNI 9099

 

SPIRAL WELDED NATURAL GAS PIPE

Production Range:
● Outer diameter: Between 355.6 mm and 2540 mm
● Wall thickness: Between 4.5 mm - 23 mm
● Height: It can be delivered in desired length between 6 - 16 m according to customer demand.

Coating Features:
● Surface preparation (DIN 55928, SIS 55900)
● Epoxy coating (AWWA C 203, DIN 30673, TS 4356, TS 4357)
● Concrete coating (AWWA C 205, DIN 2614, BS 534, TS 8590)
● Polyethylene coating (DIN 30670) , TS 5139, NF A 49-710, UNI 9099)
● Flow coat inner epoxy coating (API RP 5 L2)
● Fosion bonded epoxy coating (AWWA C 213)
● Polyurethane coating (BSS 5493)

Production Standards:
API 5L, TS 6047, DIN 17172, GOST 20195